Motorola PRO7550

39
English
SCAN
Note: The programming-mode annunciator, K,
is displayed while list view mode is active.
• The scan status annunciator, G, appears,
indicating that a scan list is being viewed.
Programming a Scan List
The program scan list feature allows you to program
the members of the scan list associated with the
currently selected mode.
To program a scan list
Note: The programming-mode annunciator, K,
blinks while program mode is active.
1
/ until PROG is
displayed.
2
l (the softkey
below
PROG ).
3 l (the softkey
below
SCAN ). The
display shows the
current mode
selected.
For example
4 Use the mode selector knob to select the
required talkgroup zone.
PROG
SCAN PHON CALL
FIRE DEPT
5 , or / to select the required zone. If
the scan status annunciator G is displayed,
the mode is part of the scan list.
6 Press the select key to enable or disable the
scan mode.
7 After making all the changes, select the
required operating mode.
8 Press the HOME key, or the PTT button, or
turn the mode selector knob to commit all
the changes made.