23
RADIO OVERVIEW
Note: When charging a battery attached to the
radio, turn the radio OFF to ensure a full
charge. See “Operational Safety Guidelines”
on page 12 for more information.
Charging A Stand-Alone Battery
To charge only the battery - at step 4 on page 22,
insert the battery into the tray, with the inside surface
of the battery facing the front of the Drop-in Tray
Single Unit Charger as shown above. Align the slots in
the battery with the alignment ribs in the Drop-in Tray
Single Unit Charger.
Note: Ensure that the bracket in the charger is
adjusted to the correct position for either
Standard or High capacity battery. See
“Charging a Standard Battery” on the right.
MN002895A01_final.book Page 23 Thursday, January 5, 2017 10:51 AM
To Next Page
Loading...
Need help?
General
