40
basics
Some features require you to select an option from a list:
•
Scroll up or down to highlight the option you want.
•
In a numbered list, press a number key to highlight an
option.
•
In an alphabetised list, press a key repeatedly to cycle
through its letters and highlight the closest matching
list option.
•
When an option has a list of possible settings, scroll
left or right to select the setting.
•
When an option has a list of possible numeric values,
press a number key to set the value.
Press
S
to
scroll down to
other options.
Press
View
key to
view details of
highlighted option.
Highlighted Option
Press
Back
key
to go back to
previous screen.
Press
M
to open
sub-menu
.
10) John Smith
9) Lisa Owens
8) Adda Thomas
7) Jack Bradshaw
6) Mary Smith
5) Carlos Emrys
4) Dave Thompson
3) Lisa Owens
Dialled Calls
Back
View
41
basics
create SMS
To create a new message, enter text.
Press
#
in a text entry view to select an entry mode:
entry modes
j
or
g
Your
Primary
text entry mode can be set to any
iTAP™
j
or tap
g
mode.
p
or
m
Your
Secondary
text entry mode can be set to any
iTAP
p
or tap
m
mode or set to
None
if you do
not want a secondary entry mode.
W
Numeric
mode enters numbers only.
[
Symbol
mode enters symbols only.
450
Press
M
to
open
sub-menu
.
For indicator
descriptions, see
following section.
Flashing cursor
indicates insertion
point.
Press
Cancel
key to exit without
making any changes.
After you enter
text, press the
Send to
key to
enter recipients.
Cancel
Send to
Msg
Vh
42
basics
To set your primary and secondary text entry modes, press
-
>
Entry Setup
in a text entry view and select
Primary Setup
or
Secondary Setup
.
Tip:
WANT TO BE LOUD IN YOUR MESSAGE? Press
0
in a
text entry view to change text case to all capital letters (
T
),
next letter capital (
V
) or no capitals (
U
).
iTAP™ mode
Press
#
in a text entry view to switch to iTAP mode. If you
do not see
j
or
p
, press
-
>
Entry Setup
to set iTAP mode
as your primary or secondary text entry mode.
iTAP mode lets you enter words using one key press per
letter. The iTAP software combines your key presses into
common words and predicts each word as you enter it.
For example, if you press
7
7
6
4
, your display shows:
443
Press
Delete
key
to delete last
letter.
Press
Select
key to lock
highlighted combination.
Press
S
right to
highlight another
combination.
Press
*
to enter
Prog
and a space.
Press
S
up to
accept
Program.
Delete
Select
Prog
Proh
Spoi
Proi
Msg
Prog ram
Vj
43
basics
•
If you want a different word (such as
Progress
),
continue pressing keypad keys to enter the remaining
letters.
•
To enter numbers quickly, press and hold a number
key to temporarily switch to numeric mode. Press the
number keys to enter the numbers you want. Enter a
space to change back to iTAP mode.
•
Press
1
to enter punctuation or other characters.
tap mode
Press
#
in a text entry view to switch to tap mode. If you
do not see
Vg
or
Vm
, press
-
>
Entry Setup
to set tap
mode as your primary or secondary text entry mode.
To enter text in tap mode, press a keypad key repeatedly to
cycle through the letters and number on the key. Repeat this
step to enter each letter.
To Next Page
Loading...
