To Next PageTo Next PageHow to unlock my Motorola Cell Phone when it says 'Locked'?
If the display of your Motorola Cell Phone says 'Locked', you can unlock it by entering the last three digits of your cellular number. If that doesn’t work, use the factory preset lock code: 123.
How to turn on my Motorola StarTac ST7797 Cell Phone if it's not responding?
If your Motorola Cell Phone doesn't turn on when you press the power button, make sure you press and hold it until the display appears and you hear an audible alert. Also, verify that a battery is installed and charged.
What to do if Voice Mail doesn't work on my Motorola StarTac ST7797 Cell Phone?
If your Motorola Cell Phone fails to connect to Voice Mail (or use a paging service, a calling card, etc.), you might have turned off the Scratchpad tones. To resolve this, follow the directions 'Turning Scratchpad Tones On and Off' on page 74 to turn the Scratchpad tones on.
Why calling card doesn't work on my Motorola StarTac ST7797?
If your Motorola Cell Phone fails to place a calling card call using the internal Phone Book, it could be due to disabled Scratchpad tones or incorrect storage of calling card information. First, follow the directions in 'Turning Scratchpad Tones On and Off' on page 74 to turn the Scratchpad tones on. Then, check that you stored your calling card information correctly, ensuring numbers are separated by pauses. Follow the instructions on 'Storing Calling Card Information' on page 55, re-enter your calling card information, and store it in the same memory location.
What to do if I get a fast busy signal on my Motorola StarTac ST7797 Cell Phone?
If you receive a fast busy signal when placing a call on your Motorola Cell Phone, it's possible the cellular system is overloaded. To resolve this, you can press the designated button to end your call attempt, or press the º button and try the call again later.
Why does my Motorola StarTac ST7797 Cell Phone battery drain so fast?
If your Motorola Cell Phone battery isn’t lasting as long as expected, it could be due to certain power-demanding features or extreme temperatures. To maximize battery life, fully charge the battery, even leaving it in the charger for an extra hour after the light turns green. Consider turning on Power Save Mode. Also, avoid exposing your phone to extreme temperatures by taking it with you when you leave your car.
Why does my Motorola Cell Phone make alternating tones when I try to call?
If you tried to place a call and received an alternating high/low tone on your Motorola Cell Phone, you might have dialed the number too soon after turning the phone on. Wait until the 'NS' light stops blinking before placing a call.
General| Brand | Motorola |
|---|---|
| Model | StarTac ST7797 |
| Category | Cell Phone |
| Language | English |
Explains RF exposure guidelines and safety standards for mobile phones.
Covers precautions for phone operation, batteries, driving, and electronic devices.
Precautions for use in aircraft, blasting areas, and potentially explosive atmospheres.
Lists typical phone and accessory package contents.
Details phone parts, function keys, and how to use the manual.
Details battery types, sizes, and combinations for optimal use.
Step-by-step instructions for handling, installing, removing, and charging batteries.
How to read the battery level indicator and understand low battery warnings.
Instructions for turning the phone on/off and understanding display indicators.
Guides for placing, answering, and ending calls.
Usage of the Smart Button and how to adjust phone volume.
Storing, recalling, and clearing names and numbers in the phone book.
Using Speed Dial and Turbo Dial™ for quick access to stored numbers.
How to use the scratchpad for temporary notes and numbers.
Overview of menu icons, navigation, and road maps.
How to view lists of received and dialed calls.
Procedures for erasing Caller Line ID memory entries.
Using the menu to recall and store phone book entries.
Storing numbers with pauses and for calling card information.
Modifying stored entries and assigning individual ring styles.
How to view individual, resettable, and cumulative call timers.
Configuring one-minute, repeating, and single audible timers.
Choosing how the phone alerts for calls and messages.
Selecting ringtones and managing keypad tone settings.
Activating voice privacy and locking/unlocking the phone.
Using priority calling and managing the phone's lock code.
Limiting call placement and resetting phone options.
Activating pager mode and switching between phone numbers.
Configuring automatic answer, hands-free, language, and battery options.
Steps to select available public and non-public networks.
Setting default search and viewing available non-public networks.
Accessing and reading voice mail and text messages.
Locking, clearing messages, editing voice mail number, and setting scroll speed.
Details on available phone accessories like batteries, chargers, and headsets.
Solutions for phone not powering on, battery life, and unlocking problems.
Resolving issues with busy signals, tones, voice mail, and calling cards.
