105
Phone Options
System Mode Settings
Analog Only
*
Turning Analog Only ON tells your phone to seek an analog
channel for the next call. If you do not place a call, your
phone will revert to regular service after a few minutes.
Note: Some peripheral devices, like fax machines and modems,
require analog operation.
*
Network and service dependent feature. Not available in all areas.
Standard Mode:
Your phone first seeks a home type
system, then a non-home type system.
Home Only Mode:
Phone will not operate outside its
home system.
Scan A Mode*:
Phone will operate only within
non-wireline (A) systems.
Scan B Mode*:
Phone will operate only within
wireline (B) systems.
Analog Only Mode*:
Phone will only operate on analog
networks. Some peripheral devices
require analog signals.
4.
Find
Feature
Press qq
qq
or ZZ
ZZ
to scroll to Analog Only.
5.
Toggle
Feature
Press AA
AA
to toggle the feature ON or OFF.
6.
Exit
Menu
Press º to exit the menu, or you may
scroll to other features.
Shortcut:*
Press
ƒ then
¤ any time to
seek an analog
network for
one call.
Standard
Scan
Home
Only
Scan A
Scan B
Analog
Only Off
To Next Page
Loading...
