Motorola StarTAC - Page 118

118
Setting up Pre-arrangement
Some networks require you to change a setting on your phone
before you can receive an incoming fax or data call. This is
called pre-arrangement. There is no need to worry about
placing data or fax calls – the pre-arrangement setting only
applies to receiving calls.
Keep in mind: In pre-arrangement mode, you will not be able
to receive incoming voice calls.
Your phone will automatically return to Voice Only mode if you
remove the cable or turn OFF the phone.
Keep in mind: Data Setup is only available if your Service
Provider requires pre-arrangement and the data cable is
connected to your phone.
1.
Enter
Menu
Press ƒ then AA
AA
to enter the menu.
2.
Select
Submenu
Press qq
qq
or ZZ
ZZ
to scroll to Phone Options
and press
AA
AA
to select.
3.
Select
Feature
Press qq
qq
or ZZ
ZZ
to scroll to Data Setup and
press
AA
AA
to select.
4.
Select
Setting
Press qq
qq
or ZZ
ZZ
to scroll to Voice Only,
Incoming Fax, Incoming Data or To Main
Menu and press
AA
AA
to select.
If you select a fax or data setting, you will
see: NoIncoming VoiceCalls.
5.
Exit Menu Press º to exit the menu. You will see:
Data Ready or Fax Ready.