Motorola SURFboard 570280-001-a - Advanced IP Filtering Page

B
Advanced Pages • Advanced IP Filtering Page
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide 33
570280-001-a
Advanced IP Filtering Page
This page allows you to define which local PCs will be denied access to the SBG941
WAN. You can configure IP address filters to block Internet traffic to specific network
devices on the LAN by entering starting and ending IP address ranges.
Note: Only enter the LSB (Least-significant byte) of the IP address; the upper bytes of
the IP address are set automatically from the IP address for the SBG941 Configuration
Manager.
Field Descriptions for the Advanced IP Filtering Page
Field Description
Start Address
Enter the starting IP address range of the computers for which you
want to deny access to the SBG941 WAN. Only enter the least
significant byte of the IP address.
End Address
Enter the ending IP address range of the computers you want to
deny access to the SBG941 WAN. Only enter the least significant
byte of the IP address.
Enabled
Activates the IP address filter, when selected.
Select
Enabled for each range of IP addresses you want to deny
access to the SBG941 WAN.
When done, click Apply to activate and save your settings.