Making and Receiving Phone Calls
26
English
Receiving a Phone Call
To receive a phone call:
•
Your phone must be switched on and unlocked.
•
You must be in an area where there is GSM900/1800 service.
•
Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
When your phone receives a call, it will ring and the display will
show the Call message (if you have Caller Line Identification,
the caller’s number or name will be displayed instead).
To answer the call, press O.
If you do not wish to answer a call you can either:
Press and release the C key. If you have enabled the
'Detailed Diverting - If Busy' or ‘Divert when unavailable’
options in the Options Menu, the caller will be diverted to the
forwarding number, otherwise the caller will hear the busy
tone.
or
Press and hold the C key. This will reject the incoming call.
No call divert option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed to show you that a call
attempt was received.
Ending a Phone Call
To end a phone call, press O or C.
To Next Page
Loading...
