Using the Options Menu
52
English
Select Phone Line
This option allows you to switch between Line 1 and Line 2.
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
AThis feature is not available when you are using the
GSM 900 band.
Adjust Ring Volume
i Press E followed by the volume button to either increase
or decrease the ringer volume.
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the front of
your phone.
Ringer On or Off
Sets incoming call alert to either a ringer tone or a display
message.
j
Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone ... Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
AIf you select the Single Ring Tone option, the phone will only
ring once when a call is received.
j
Set Ringer Tone 2
This option sets the tone your phone will make when an
incoming call is received on Line 2.
AThis option will not appear if you do not subscribe to Line 2.
j
Set Message Alert Tone
This option sets the tone your phone will make when it receives
an SMS message.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone ... Music Tone
When selected, your phone will produce one of these alternative
SMS alert tones.
AIf you select the Single Ring Tone option, the phone will only
ring once when it receives an SMS message.
To Next Page
Loading...
