Making and Receiving Phone Calls
23
English
Making and Receiving Phone Calls
Switching the Phone On and Off
To switch the phone on or off, press and hold the S key.
If VibraCall™ is selected, the phone will vibrate when it is
switched on.
If you switch the phone on and there is no SIM card
inserted, you will be asked to insert one. The phone will
check that an inserted SIM card is valid.
A number of messages will then be displayed:
• Enter PIN - a request to enter the SIM card PIN code (if
required).
• Enter Phone Unlock Code - a request to enter the
phone unlock code (if required).
• Searching... followed by a network name - as the
phone searches and then finds a suitable network to
connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter AO.
As you type in each digit, a * character will be displayed.
If you make a mistake, press and release the
C key to
remove the last digit. Holding the
C key down will
remove the entire entry.
When the PIN code is complete press the
O key.
If the PIN code entered is incorrect, the warning message
Wrong PIN will be displayed, followed by Enter PIN.
! If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock-up and the
Blocked message will be displayed. See ‘Unblocking
Your Phone’ for details on unblocking your phone.
The PIN code can be changed, see ‘Change SIM PIN2 Code’
in the Phone Setup Menu section for more details.
j Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock
Code you must enter your unlocking code by entering
B
O.
The unlock code is a four digit number which is set at
manufacture to 1234. The code can be changed, see
‘Change Unlock Code’ in the Phone Setup Menu section for
more details.
If you forget your unlock code, press the
$ key. This will
display the ‘Change Unlock Code’ option. Enter
O
D, enter a new unlock code, and press
O.
Locking the Keypad
Press the * and # keys simultaneously to prevent
accidental usage of the phone. To remove the lock, press
# and * simultaneously. All keys with the exception of
the
S key will be disabled. You can still answer an
incoming call by pressing
O when the keypad is locked.
Angel.book Page 23 Monday, April 24, 2000 8:04 PM
To Next Page
Loading...
