Making and Receiving Phone Calls
27
English
Receiving a Phone Call
To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where you have subscribed to
GSM900/1800 service.
• Your Call Diversion and Call Barring settings should not
be set to divert or bar incoming calls.
When your phone receives a call, it will ring or vibrate and
the display will show the Call message (if you have Caller
Line Identification, the caller’s number or name will be
displayed instead).
To answer the call, press
O.
If you do not wish to answer a call, you can either:
Press and release the
C key. If you have enabled the
'Detailed Diverting - If Busy' or ‘Divert when unavailable’
options in the Options Menu, the caller will be diverted
to the forwarding number, otherwise the caller will hear
the busy tone.
or
Press and hold the
C key. This will reject the incoming
call. No call divert option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed to show you that a
call attempt was received.
Ending a Phone Call
To end a phone call, press O or C.
Angel.book Page 27 Monday, April 24, 2000 8:04 PM
To Next Page
Loading...
