Talking and Listening
18
Talking and Listening
To communicate, all radios in your group must
be set to the same channel (1-22) and Interference
Eliminator Code (0-99).
To talk, press and hold . Hold the radio 2 to 3
inches away from your mouth when talking.
When you finish talking, release (press to talk,
release to listen).
Talk Range
Your radio is designed to maximize performance and improve transmission
range. Do not use the radios closer than 5 feet apart.
Monitor Button
Pressing and holding for 3 seconds allows you to listen to the volume level
of the radio when you are not receiving. This allows you to adjust the volume, if
necessary. You can also use to check for activity on the current channel before
you transmit (talk).
To Next Page
Loading...
