41
TMO Group Call
Message addressing and sending:
• address can be predefined by Service Provider if not it will
be send to currently selected group
• if no group selected, the message is sent to the reserved
address
• the message is sent even if the user is involved in an active
service
Indication depend on Service Provider. Visible/audible can be
disabled for the status message.
When the radio is PIN locked the user can still press the
Emergency button/footswitch to send the message. If the
radio is out of service the user will only see indication that
operation failed.
6815321H01_KOR.book Page 41 Wednesday, November 26, 2008 1:25 PM
To Next Page
Loading...
