108
3. Press
Edit. The message is now in the
predefined message editor.
4. Enter your message.
• To move the cursor forward – press
.
• To move the cursor backward – press .
• Press
Clear to delete the character to the left of the
cursor.
5. Press PTT or or the relevant one-touch numeric key
to send the message. The display will show one of the
following delivery reports:
Message Delivered — to indicate that the message was
successfully sent and received.
Message Failed — the message was not received.
After sending the message, your MTM800 will return to the
predefined template selection screen.
A predefined message address is also defined by your Service
Provider during programming and cannot be changed.
You will not be able to send another message while your
MTM800 is awaiting message acknowledge.
Register:
Clear
abc 27
Back
6815321H01_KOR.book Page 108 Wednesday, November 26, 2008 1:25 PM
To Next Page
Loading...
