Motorola TETRA MTM800

Making a TMO Emergency Group
Call
Press and hold . Emergency Alarm
is sent automatically.
While in Emergency Mode, press and
hold PTT to talk. If using Hot Mic
feature, wait for the Emergency Mic
On message to be displayed, and talk
without pressing PTT.
To exit Emergency Mode press and
hold Back.
Answering a Call
Your MTM800 switches to the mode of
the incoming call and starts ringing. To
answer the call,
• press for a Phone or PABX call
or
• press PTT for all other calls.
Sending a Status Message
Sending a New Message
Sending a User defined Message
Sending a Predefined Message
Handling New Incoming Text
Messages
The icon will flash on your display
and the MTM800 sounds a tone. For
details see the Menu Messages section
in the User Guide.
Handling Old Messages
Last Number Redial
In Private Mode, press PTT to call the
last called number.
In Phone/PABX mode, press to
display last called number, or a list of
last called numbers. If list present,
scroll to desired number. Press
again to call.
Using the Menu
1 1
Select
Menu
Press PTT
to send
Ok
Press
Status
1 3
Menu
Write
Press Optns
and select Send
message
Select
1 New
Press Ok
Press
PTT
Select recipient
or enter number
Scroll through
templates and
select one
1 3
Menu
Press Ok
2 Templates
Select
Press Optns
and select Send
Press
PTT
Select recipient
or enter address
Scroll through
templates and
select one
1 3
Menu
Press
Edit
Type required
information
Press
PTT
Press Ok
3 Predefined
Select
• Entering the menu: Press .
• Scrolling through the menu:
Press or .
• Selecting a menu option: Press Ok.
• Exiting the menu: Press Back.
1 2
Scroll
Read
Erase
/
Menu
Ok
Press
messages
Exit
Read /
Select
1 2
Menu
Erase /
Erase All
Optns
Scroll
messages
Ok
Press
Menu
6815321H01_KOR.book Page 122 Wednesday, November 26, 2008 1:25 PM