34 November 18, 2005 6809495A82-A
Disassembly V3i
Removing and Replacing the Camera Assembly
1. Remove the battery cover, battery, SIM, antenna, rear housing, and
transceiver board assembly, flip assembly cover, and CLI lens cover as
described in the procedures.
2. Use the disassembly tool to unseat the camera connector from the camera
connector socket.
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
Figure 13. Camera Assembly Removal
Disassembly tool
Camera connector
Camera assembly
To Next Page
Loading...
