6809495A82-A November 18, 2005 39
Level 1 and 2 Service Manual Disassembly
Removing and Replacing the CLI Lens
1. Remove the battery cover, battery, SIM, rear housing, antenna, transceiver
board assembly, flip assembly cover as described in the procedures.
2. Heat the CLI lens to a temperature of 100°C (212° F) for 20 seconds.
3. Slide the flat end of the plastic disassembly tool, between the lens and the metal
frame.
051819o
Figure 18. CLI Lens Removal
CLI lens
Disassembly tool
To Next Page
Loading...
