6809495A82-A November 18, 2005 31
Level 1 and 2 Service Manual Disassembly
Removing and Replacing the Transceiver Board Assembly
1. Remove the battery cover, battery, SIM, antenna, rear housing and battery
tray as described in the procedures
.
2. Lift the transceiver board assembly out of the front housing with the metal
tweezers. See Figure 10.
3. To replace, insert the transceiver board assembly into the rear housing.
4. Carefully and gently press the transceiver board into position and until it snaps
into place.
5. Replace the antenna assembly, rear housing, SIM, battery, and battery cover
as described in the procedures.
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
051113o
Figure 10. Removing the Transceiver PC board Assembly
Transceiver PC Board
Assembly
To Next Page
Loading...
