116 - Getting More Out Of Your Phone
Note: Check your computer or hand-held device to determine the
type of cable you need.
Attach a Serial Cable
Use the interchangeable head on the Motorola Multi-Connect Serial
Cable to connect a computer, Palm III device, or Palm V device to
your phone.
Do This
1 Plug the serial cable
into the detachable
head. Make sure
that the Motorola
logo on the
detachable head
and the metal
shielding on the
serial cable plug are
both facing you.
2 With the Motorola
logo and the phone
both facing you,
plug the detachable
head into the
phone’s accessory
connector port.
3 Plug the other end of the cable into the serial
interface connection on the external device and
tighten the screws.
UG.GSM.book Page 116 Thursday, June 6, 2002 2:22 PM
To Next Page
Loading...
