Motorola VERVE CAM - Record Videos

Record Videos (via Hubble Connect for VerveCam app) 15
en
13. Record Videos (via Hubble Connect
for VerveCam app)
Note: The App will remember the last used mode
and will go to that mode automatically when
connected.
Videos will be stored on the Camera’s memory
card.
1. Run Hubble Connect for VerveCam app on
your smartphone.
2. Go to the viewfinder screen and tap
Video
mode on the bottom panel.
3. Tap to start recording video.
You will hear a beep sound.
The blue LED indicator and the white video
mode indicator flash when video recording is
in progress.
4. Tap again to stop video recording. The
blue LED indicator and the white video mode
indicator stop flashing.
5. To change video settings, tap to select the
following options:
Resolution
QHD (2.5k) 2560x1440 @ 30fps (16:9)
Full HD (1080p) 1920x1080 @60fps (16:9)
HD (720p) 1280x720 @120fps (16:9)
HD (720p) 1280x720 @60fps (16:9)
HD (720p) 1280x720 @30fps (16:9)
Full HD (1080p) 1920x1080 @30fps (16:9)
Slow Motion
ON
OFF