App and Firmware Upgrades 26
en
20. App and Firmware Upgrades
20.1 App Upgrade
You can find the latest version of Hubble Connect for
VerveCam app by visiting the app store (e.g.: iTunes
App Store, Google Play
TM
). From there, you can see
what's new with the app and install the latest version.
Occasionally, the App Server will also send you a
notification that a latest version of the app is available.
While some of the upgrades simply keep your
system running efficiently, and some are critical to
system functionality. We strongly recommend that
you complete the upgrade as soon as possible.
Software Upgrade will only be performed in Wi-Fi
®
mode.
20.2 Firmware Upgrade
The Camera is BLE-enabled and has over-the-air
firmware upgrade capability. Firmware updates will
be sent to the Camera via Hubble Connect for
VerveCam app. Please follow the app instructions
for upgrade.
Note:
Firmware upgrades will not be performed
automatically. You need to confirm the upgrade by
following the procedures shown on the app. Your
Camera must be connected to Wi-Fi
®
for firmware
upgrade.
To Next Page
Loading...
