Hubble Connect for VerveLife
Hubble Connect
TM
for VerveLife
TM
8 en
• Locate a lost earbud: Locate on a map the last time your earbud
was connected to your device.
• Adjust the equalizer: Choose from six preset sound proles, so
your tunes sound the way you like.
• Pass-Through Audio (default o): Stay in tune with your
surroundings by turning Pass-Through on to hear noises around
you.
• Ear Detect (default o): When Ear Detect is on, the earbud
automatically turns on when it detects it is in your ear and turns o
when removed from your ear.
When Ear Detect is o, earbuds will remain on when connected
to your device until you put them in the case.
• Voice Prompts: Choose a new language for Voice Prompts from
the available selection. This update will take several minutes. The
earbuds must be inserted into the case and be close to your
device during update. Best to do while charging the phone and
headset.
• Help: Get answers.
Hubble Connect for VerveLife can greatly enhance your earbud
experience. Download app for free at the App Store® or Google
PlayTM (AndroidTM 4.3 or higher)
Note: Both earbuds must be in the case to make changes to
these settings via the app (Does not apply for the location or help
feature).
To Next Page
Loading...
Need help?
General