28
basics
D
R
A
F
T
•
If you want a different word (such as
Progress
), continue pressing keypad keys
to enter the remaining characters.
•
Press
1
to enter punctuation or other
characters.
tap mode
Press
#
in a text entry screen to switch to
TAP
mode. If you do not see
g
or
m
, press
M
>
Entry
Setup
to set
TAP
mode as your
Primary
or
Secondary
text entry mode.
To enter text in
TAP
mode, press a keypad key
repeatedly to cycle through the letters and
number on the key. Repeat this step to enter
each letter.
For example, if you press
8
one time, your
phone displays:
After 2 seconds, the character is accepted
and the cursor moves to the next position.
numeric mode
In a text entry screen, press
#
to switch
entry modes until the
12
(numeric) indicator
displays.
Press keypad keys to enter the numbers you
want. When you finish entering numbers,
press
#
to switch to another entry mode.
OK
DELETE
Message
765
T
Press
OK
to
accept &
store text.
Press
DELETE
to
erase the
character to left of
insertion point.
Character
displays at
insertion
point.
To Next Page
Loading...
