ASTRO Digital Spectra and Digital Spectra Plus Model W4, W5, W7, and W9 75
Trunking Operation
2 Turn the Mode knob (W4), or
press the Mode rocker
switch (W5, W7, W9) to
locate the number you want
to call.
The display first shows the
name, and then the number.
3 Press the Sel button or the
PTT button.
The displayed number is
automatically dialed.
Note: If the number contains a programmed pause, the dialing
pauses briefly when
P is displayed. After the brief pause, the
rest of the numbers is dialed.
If you are out of range of the trunked system,
NO PHONE is
displayed, and a continuous low-pitched tone sounds. Press
the HOME or Phon button to resume normal operation.
If the trunked phone interconnect is in use or the phone
interconnect is out of service, a telephone-type busy tone
sounds, and the display shows
PHON BSY (W4, W5, W7) or
PHONE BUSY (W9). Your number is automatically dialed when
the phone interconnect becomes available. If you hang up,
you lose your place in the queue.
If
PHON BSY (W4, W5, W7) or PHONE BUSY (W9) is displayed
with a low-pitched tone rather than a telephone-type busy
tone, the call is not queued. You must hang up and try again.
4 When your party answers,
press the PTT button to talk,
and release it to listen.
To Next Page
Loading...
