Motorola W4 - Store a Unit ID Number in the List (Models W7 and W9 Only)

94
Trunking Operation
Store a Unit ID Number in the List
(Models W7 and W9 Only)
The Private Conversation and Call Alert page features share the
same prestored list of units’ IDs.
1 Press and hold the Call,
Page, or 2Pge button to
review the Call ID list.
The Call indicator flashes
and a high-pitched tone
sounds.
2 Press the Mode rocker
switch to locate the list
member you want to change.
3 Press the Sel button to
select the unit ID store
function.
4 Enter the new unit ID number
on the keypad.
Note: If you make an error, press the Mode down ▼ rocker switch
or #Del to erase each incorrect digit.
5 When all the digits of the ID
are entered, press Sel to
store the new ID.
* Optional button (included but not installed).
O # Del Rcl
Mode
Vol
Mic
Phon
Call Sel
PWR
Scan
XMIT
BUSY
DIM
HOME
1 Ste 2
3
Lck
4 Sts
5 Rpg
6 Msg
7 H/L
8 Mon
9 Dir
MODE CALL
SELECT
2 Pge
*
HOME
Model W7
XMIT BUSY
123
456
789
0
DIM
Pri
Non
Pri
Emer Dir
Scan
Call
Mode Vol Sel
Home
Page Rpgm
Site
Phon H/L Lock
Rcl Sql
Del
MODE SELECT
HOME
Sts Msg
Srch
CALL PAGE
Model W9