62
Conventional Radio Features
3 With the desired status name
or number displayed, press
the Sel or the PTT button to
send the transmission.
One of the following
conditions occur:
• The radio display shows
PLS WAIT (W7) or PLEASE
WAIT
(W9) until the
transmission is received
and acknowledged.
When the dispatcher
acknowledges the status,
four high-pitched tones
sound, and the display
shows
ACK RCVD.
The radio then returns to
normal dispatch operation.
• If the status is not
acknowledged after
approximately six seconds,
the display alternates
between
NO ACK and the
associated status name. A
low-pitched tone also
sounds continuously.
To Next Page
Loading...
