Chapter 4
Getting Started
This chapter provides instructions on how to prepare your radio for use.
4.1
Inserting a SIM Card
Prerequisites: Turn off your radio.
Procedure:
1 Remove the battery.
2 Lift the SIM card slot cover.
3 With the contacts facing down, align the card notched end first and slide the SIM card into the
slot.
NOTE:
Depending on your radio model, if your radio has the SIM card slot, you can insert the
SIM card as instructed. At any time, peeling off the radio label voids the warranty.
4.2
Attaching the Battery
Procedure:
1 Align the battery contacts with the contacts inside the battery compartment.
a Insert the contact side of the battery first.
b Gently push the battery into place.
2 Attach the battery cover by aligning it in place and slide the battery latch until it snaps into place.
3 Slide the battery latch into lock position.
4.3
Charging the Battery
Your radio is powered by a Lithium-Ion (Li-Ion) battery.
Prerequisites: Turn off your radio when charging.
Procedure:
•
To comply with warranty terms and avoid damages, charge the battery using a Motorola
Solutions charger exactly as described in the charger user guide.
• Charge a new battery 4 to 5 hours before initial use for best performance.
Batteries charge best at room temperature.
NOTE: All Motorola Solutions chargers can charge only Motorola Solutions authorized
batteries.
MN009326A01-AA
Chapter 4 : Getting Started
18
To Next Page
Loading...
