Motorola WAVE PTX TLK 110 - Emergency Alerts and Calls; Responding to Alerts and Calls

• The Emergency tone sounds.
•
The amber LED illuminates.
• The display shows Emergency
9.3
Receiving and Responding to Emergency Alerts
When you receive a Declared-Emergency Alert, your radio shows the following indications:
• The Emergency tone sounds.
• The amber LED blinks for 2 seconds.
• The display shows the Declared-Emergency Alert icon and the initiator's alias.
NOTE: The alert has a higher priority compare to making or receiving call.
When you receive a Cancelled-Emergency Alert, your radio shows the following indications:
•
The Emergency tone sounds.
• The amber LED blinks until all Emergency Alerts are cleared from the Emergency Alert List.
• The display shows the Cancelled-Emergency Alert icon and the initiator's alias.
NOTE: The alert has a higher priority compare to making or receiving call.
Procedure:
1 From the menu, select Emergency Alert List.
2 To select the required Emergency Alert alias, press the Volume Up
or Volume Down button.
3 Press PTT button to initiate a call.
9.4
Receiving and Responding to Emergency Calls
When you receive a Emergency Call, your radio shows the following indications:
• The Emergency tone sounds.
• The green LED illuminates
• For Group Call, the display shows the Group Name, Emergency Call icon in front of the caller alias
for 2 seconds, and then scroll to Caller Alias.
• For Private Call, the display shows the Emergency Call icon and the initiator's alias.
• For Private Call, the display shows the display call type, Emergency Call icon in front of the caller
alias for 2 seconds, and then scroll to Caller Alias.
NOTE: The Emergency Call has a higher priority compared to Talkgroup Call and Private Call.
Procedure:
1 To respond to the Emergency Call, press and hold the PTT button.
2 Wait for the Talk Permit Tone to end, and speak into the microphone.
3 To listen, release the PTT
button.
MN009326A01-AA
Chapter 9 : Emergency Operations
34