11
English
BATTERIES AND
CHARGERS
When acquiring additional chargers or power
supplies, make sure you have similar drop-in
tray chargers and power supplies set.
Charging with the Drop-in Tray Single Unit
Charger
1. Place the drop-in tray charger on a flat surface.
2. Insert the connector of the power supply into
the port on the side of the drop-in tray charger.
3. Plug the AC adaptor into a power outlet.
4. Insert the radio into the tray with the front of the
radio facing the front of the charger, as shown.
Note: When charging a battery attached to a radio,
turn the radio OFF to ensure a full charge.
See
“Operational Safety Guidelines” on
page 5 for more information.
Charging a Standard Battery
The drop-in tray charger has a removable
bracket that is adjustable depending on the
type of battery that needs to be charged. It is
designed to charge either the battery (with the
radio) or a standalone battery. The drop-in tray
charger comes by default set up to charge a
standard battery. The following image on page
page 12 shows the orientation for each battery:
Power Supply
(Transformer)
Drop-in Tray
Charger Port
To Next Page
Loading...
