■
20
Display Description Default
1
Direction and distance to the primary point when the destination
has been set
* BAR icon appears when the distance remaining to the destination
is less than 200m.
2
Remaining distance to the destination when the destination has
been set
3 Estimated arrival time when the destination has been set
4 Generated when HUD and MOTREX HUD APP are connected
5
Driving distance: Driving distance from 1 trip after ignition
Driving distance
Driving time: Time from 1 trip after ignition
DPF: Shows capturing or combusting (only for diesel cars)
*When combusting, it is helpful not to turn off the engine.
6
Gas icon: Shows fuel status
Gray: Enough
Yellow: Not enough
Flickering yellow: Almost empty
Gray (--): Remaining fuel/possible distance to drive not supported
* Possible distance to drive for electric cars is shown as ”--“.
* Remaining fuel for electric cars is shown as the remaining battery
in %.
Gas icon/Dis-
tance to empty
Coolant icon: Coolant temperature (-40 to 150)
* Not supported for electric cars; displayed as “--”
7
Battery charge rate or battery voltage
* Shown in yellow if the battery rate or voltage is low.
IBS car: Charge rate / Non-IBS car: Battery voltage
8 Car speed
9
Average fuel efficiency
- When traveling less than 1km after ignition, it is shown as “--
km/L”
* Displayed as “--” for electric cars (not supported)
※ Change the usage option and values in MOTREX HUD APP.
To Next Page
Loading...
General