72
FEATURES
1. STANDBY MODE
Connect the multicooker to the outlet; the system will start self-diagnostics check, a
beep will sound, and the digital display and all indicators will light up. After 1 second, the
symbols ---- will appear on the display, which indicates standby mode.
2. OPERATING MODE
1. In standby mode press the selected function - g.13; the indicator on the button will
ash. For the Stewing and Steamer functions, the ingredient types are Vegetables, Fish,
Meat/Beans. After selecting the appropriate function, press the "Ingredient Type" button
repeatedly to select the desired ingredient (the corresponding indicator will light up)
After 5 seconds, if another function is not selected or the “Keep warm / cancel” button has
not been pressed, the indicator will stop ashing and preheating will begin.
2. The default temperatures, time, delayed start, desired position of the lid, and the range of
changes in temperature and time for each cooking function are listed below.
3. Keep warm mode after the end of the pressure cycle, the display will show the number
“0”, a beep will sound, and the multicooker will switch to Keep warm mode (except for the
“Yogurt” and “Multichef” modes). After that, “00:00” will be displayed on the screen, and the
temperature will be maintained between 65°C and 75°C.
In standby mode, if you press the “Keep warm / Cancel” button, the option to keep the dish
hot will be selected, the digital display will show “00:00”, and the inside temperature will be
maintained between 65°C and 75°C.
After 24 hours, the keep warm heating function will automatically switch o, and the
multicooker will go into standby mode.
To Next Page
Loading...
