EasyManua.ls Logo

Moultrie M-Series - Important Battery and Warranty Information; Troubleshooting, Returns, and Mobile Compatibility

Moultrie M-Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important Battery lnformation
- Only use Alkaline or Lithium batteries. We recommend the use of Energizer batteries.
- Do not mix old and new batteries. Always replace ALL the batteries at the same time.
- When the camera is not in use, please remove the batteries.
Moultrie Limited Warranty
This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the
date of purchase for 2 years. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to
be defective in original material or workmanship. Should you require in-warranty service, call our Customer Service Department. If your problem
cannot be addressed over the telephone, we may need you to send us your defective product plus proof of purchase.
You must register your camera at www.moultriefeeders.com/warranty to activate your 2-year warranty.
Troubleshooting
Please visit www.moultriefeeders.com/contact-us for troubleshooting and helpful tips.
Returns and Repairs
Please visit http://www.moultriefeeders.com/return-policy and complete the form or our Service Department will gladly answer any questions
you have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.
MOULTRIE MOBILE® COMPATIBILITY
Your camera is compatible with our Moultrie Mobile® cellular service when combined with the Field Modem MV1. Please visit www.moultriemobile.com
for more information.
MOULTRIE M-SERIES
2 15
RESET
OPTIONS
INFOSTRIP
OPTIONS
MOTION + T.L.
MAIN SCREEN
TIME LAPSE
MAIN SCREEN
MOTION DETECT
MAIN SCREEN
DATE & TIME
START MOTION +
T.L. CAPTURE
START TIME
LAPSE CAPTURE
START MOTION
DETECT CAPTURE
CAMERA NAME
*If Timelapse Program #1 is set to Always On,
settings for Program #2 will be disabled.
T.L. PROGRAM #1
START TIME
TIMELAPSE
INTERVAL
DETECTION
DELAY
PIR
SENSITIVITY
MULTI-SHOT
PHOTO OR
VIDEO
T.L. PROGRAM #1
STOP TIME
T.L. PROGRAM #2
START TIME
T.L. PROGRAM #2
STOP TIME
RESET
OPTIONS
*Set options in the respective menus.
TEMPERATURE
(ºF OR ºC)
INFOSTRIP
ACTIVE
PHOTO/VIDEO
OPTIONS
PHOTO QUALITY
MOTION FREEZE
VIDEO QUALITY
VIDEO LENGTH
MEMORY
OPTIONS
ERASE ALL IMAGES
MANAGED MEMORY
SYSTEM
OPTIONS
PROGRAM
SECURITY CODE
UPGRADE
FIRMWARE
FACTORY RESET
CONFIRM
SECURITY CODE

Related product manuals