EasyManua.ls Logo

Mountfield 1540 - 4.6 LIGHT SWITCH; 4.7 BLADE ENGAGEMENT AND BRAKE CONTROL

Mountfield 1540
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
EN
CONTROLS AND INSTRUMENTS
ton (4.9.2), keeping it pressed until the control motor stops.
The grass-catcher returns to the working position by pressing
the push-button (4.9.3), keeping it pressed until the pawl hooks
into place and the control motor stops.
4.10 P
ILOT LAMPS AND AUDIBLE WARNINGS
When the key is turned to «ON», all the
lights come on at the same time for about
half a second (with a brief sound warning)
to indicate that the machine is working
properly.
Afterwards, when a warning light comes on, it indicates:
a) parking brake engaged;
b) missing grass-catcher or stone-guard;
c) blades engaged;
d) seat without operator;
e) transmission in “neutral” position.
f) steady = fault in battery charger (with engine running);
flashing before starting the engine = the battery cannot start the engine,
so contact an authorized service centre.
The sound warning can be:
– continuous: = the electronic card's protection device has cut in;
= the engine has been off for more than 30 seconds with the key
turned to «ON»;
– intermittent = grass-catcher full.
4.11 D
ASHBOARD DISPLAY ( if fitted)
When you turn the key to «ON», all the icons appear at
the same time for about half a second (with a brief
sound warning) to indicate that the machine is working
properly. The display opens the “Hour counter” func-
tion.
The «MODE» button allows you to access all the
operating functions in sequence.
4.9.2
4.9.3
a b c d e f

Related product manuals