7
EN
2.1 IDENTIFICATION OF THE MACHINE
The plate located near the battery housing has
the essential data of each machine.
1. Acoustic power level according
to directive 2000/14/CE
2. Conformity mark according to
directive 98/37/EEC
3. Year of manufacture
4. Operating engine speed in r.p.m
(if indicated)
5. Type of machine
6. Serial number
7. Weight in kg
8. Name and address of
Manufacturer
9. Type of transmission (if indicated)
2.2 IDENTIFICATION OF MAIN COMPONENTS
Various main components can be seen on the machine, and these have the following
functions:
11. Cutting deck: this is the guard enclosing the rotating blades.
IDENTIFICATION OF THE MACHINE AND COMPONENTS
2.
IDENTIFICATION OF THE MACHINE AND COMPONENTS
Write your machine’s serial
number here (6)
✍
L
WA
dB
kg
S/N
min
-1
8 5 4 7
3 9 6 2 1
To Next Page
Loading...
Need help?
General
