10
CONTROLS
Manual start handgrip (Figure 6.A)
A
Figure 6
Engine brake lever / cutting blade (Figure 7.A)
Drive ON lever
IMPORTANT The engine must be started only with the drive OFF.
IMPORTANT Avoid moving the machine backwards when the drive is ON.
A
B
Figure 7
Cutting height adjustment
Do this when the cutting blade is stationary.
• Adjustment (See Figure 8.A)
USING THE MACHINE
IMPORTANT For instructions on the engine, refer to the correspond-
ing manual.
Preliminary procedures
Place the machine in a stable horizontal position on the ground.
Filling with oil and fuel
IMPORTANT The machine is supplied without engine oil and
without fuel.
engine oil.
Preparing the machine before starting work
NOTE This machine can be used to mow lawns in various ways;
To Next Page
Loading...
