Figure 21
STORAGE
When the machine is to be stored:
1. Start the engine outdoors and leave it running at idle until it stops in order to consume all the fuel left in the
2.
3.
4. Store the machine:
–
–
–
– making sure any tools used for maintenance are removed.
Store the machine so as to avoid risk in the event of accidental contact with people, children or
animals. Do not attempt to store in vertical position machines that have not been designed for this
purpose.
HANDLING AND TRANSPORTATION
Whenever the machine is to be handled, raised, transported or tilted you must:
– Stop the machine (par. Stop) until the moving parts come to a complete halt.
–
– Wear heavy work gloves.
–
– Use an appropriate number of people for the weight of the machine and the characteristics of the vehicle or
the place where it must be placed or collected.
– Make sure that machine movements do not cause damage or injuries.
– When transporting the machine on a vehicle or trailer, always:
– Use an access ramp of suitable strength, width and length.
–
– Lower the cutting blade assembly (par Cutting height adjustment) so that it cannot cause a hazard for anybody.
– Position it so that it cannot cause a hazard for anybody.
–
and fuel leaks.
To Next Page
Loading...
Need help?
General
