5
Use limitations
– Never operate the machine with damaged, missing or incorrectly assembled guards (grass catcher, rear
discharge guards).
–
– Never disengage, deactivate, remove or tamper with the safety systems/micro switches installed.
–
–
you will reduce the risk of hazards and improve the quality of your work.
MAINTENANCE, STORAGE AND TRANSPORT
Ensure regular maintenance and correct storage to maintain machine safety and high performance levels.
Maintenance
– Never use the machine with worn or damaged parts. Faulty or worn-out parts must always be replaced and
never repaired.
–
–
The noise and vibration levels shown in these instructions are the maximum levels for use of
the machine. The use of an unbalanced cutting blade, the excessive speed of movement, or
the absence of maintenance have a signicant inuence on noise emissions and vibrations.
Consequently, it is necessary to take preventive steps to eliminate possible damage due to high
levels of noise and stress from vibration; Maintain the machine well, wear ear protection devices,
and take breaks whilst working.
Storage
– Do not store the machine with fuel in the tank in an area where fuel vapours could reach a naked light, a
spark or a strong heat source.
–
ENVIRONMENTAL PROTECTION
and the environment we live in.
– Avoid being a disturbance to the neighbourhood. Use this machine at reasonable times of the day only (not
early morning or late evening when the noise could cause disturbance).
– Comply with local regulations for the disposal of packaging, deteriorated parts or any elements with a
and taken to collection centres, who will recycle the materials.
– Comply with local regulations for the disposal of waste materials.
– When the machine is withdrawn from service, do not dispose of it in the environment, but take it to a waste
disposal facility in accordance with the local regulations in force.
GETTING TO KNOW THE MACHINE
DESCRIPTION OF THE MACHINE AND PLANNED USE
This machine is pedestrian walk behind lawnmower.
The machine is essentially composed of a motor which drives a cutting blade enclosed in a casing, equipped with
wheels and a handle.
The operator is able to operate the machine and use the main controls, always staying behind the handle at a safe
distance from the rotating cutting blade.
If the operator leaves the machine, the motor and cutting blade will stop within a few seconds. Intended use This
machine is designed and built to cut (and collect) grass in gardens and grassy areas, with a height according to its
cutting capacity, driven by an operator walking behind it.
Generally speaking this machine can:
1. Mow the grass and collect it in the grass catcher.
2. Mow the grass and discharge it on the ground through the rear chute.
3. Mow the grass, cut it and discharge it on the ground (mulching plug).
To Next Page
Loading...
Need help?
General
