3
reliable service if operated in accordance with these instructions.Please read and understand these
Operating Instructions before using your mower. Failure to do so could result in personal injury
or damage to the equipment.
GENERAL INFORMATION
HOW TO READ THE MANUAL
Some paragraphs in the manual contain important information regarding safety and operation and are emphasised
in this manner:
Note or important these give details or further information on what has already been said, and aim to prevent
damage to the machine.
This symbol highlights danger. Failure to observe the warning can lead to possible personal and/or third party
injury and/or damage.
Whenever reference is made to a position on the machine “front”, “back”, “left” or “right” hand side, this refers to the
operator’s driving position.
REFERENCES
Figures
illustrated in this document.
SAFETY REGULATIONS
TRAINING
Become acquainted with the controls and the proper use of the machine. Learn how to stop the
motor quickly. Failure to follow the warnings and instructions may result in re and/or serious
injury.
– Never allow children or persons unfamiliar with these instructions to use the machine. Local laws may
establish a minimum age for users.
– Never use the machine if the user is tired or unwell, or has taken medicine, drugs, alcohol or any substances
– Do not allow children or other passengers to ride on the machine.
–
people or their property. It is the user’s responsibility to assess the potential risk of the area where work
is to be carried out and to take all the necessary precautions to ensure his own safety and that of others,
particularly on slopes or rough, slippery and unstable ground. If the machine is sold or lent to others, make
sure that the operator reads the user instructions contained in this manual.
PRELIMINARY PROCEDURES
Personal Protective Equipment (PPE)
– Always wear suitable work attire, hard-wearing safety footwear with non-slip soles and long trousers. Do not
operate the machine barefoot or wearing open sandals. Wear hearing protection devices.
–
what occurs around you in the work area.
– Wear protective gloves whenever your hands are at risk.
–
– Tie your hair back if it is long.
Work area/Machine
– Thoroughly inspect the entire work area and remove anything that could be thrown by the machine or
damage the cutting blade (stones, branches, iron wire, bones, etc.).
To Next Page
Loading...
Need help?
General
