C
Figure 18
MAINTENANCE
General information
The safety regulations to follow are described in chap. Safety regulations. Strictly comply with
these instructions to avoid serious risks or hazards:
Before commencing any inspections, cleaning or maintenance/adjustments on the machine:
– Stop the machine.
– Make sure that any moving component has stopped.
– Wait until the engine cools down.
– Remove the spark plug cap (Figure 18.B).
– Read the relevant instructions.
– Use suitable clothing, protective gloves and goggles.
Routine maintenance
– The frequency and types of maintenance are summarised in the “Maintenance Table” (chapter Maintenance
table).
IMPORTANT Any maintenance and adjustment operations not described in this manual must be carried out by a
Mounteld Authorised Service Dealer.
To Next Page
Loading...
