15
Grass catcher emptying
For grass catcher with full indicator:
Lifted = empty. Lowered = full*.
To remove and empty the grass catcher (Figure 16.A):
1.
2.
C
D
A
B
Figure 16
Stop (Figure 17.A)
After having stopped the machine, it will
take a few seconds for the cutting blade
to stop. Do not touch the engine after
stopping it. Risk of burns.
IMPORTANT Always stop the machine.
– When moving between work areas.
– When driving on grass free surfaces.
– Close to an obstacle.
– Before adjusting the cutting height.
– Any time the grass catcher is removed or
retted.
After use (
1. Clean (par. Cleaning).
2. If necessary, replace damaged components
and tighten any slack screws and bolts.
IMPORTANT Any time the machine is inactive or
unattended:
– Remove the spark plug cap (for models with manual start handgrip) (Figure 18.B/C).
Figure 17
A
To Next Page
Loading...
