Mountz MDC Series - Operation; Operation Screen

mountztorque.com - 1080 N 11
th
St, San Jose CA 95112 - 408.292.2214
5
Operation
Operation Screen
Menu
Date & Time
Torque target, Snug angle
Speed target/Monitoring
Fastening time
Angle A1 / A2
Count Target / Count
Monitoring angle/time
Operation screen is a default window when the controller power ON.
The real time monitoring data and target settings are displayed together.
To go other menu, click the on the top right side.
There are 4 menu for Parameter change, Remote operation, Real time monitoring and Display
settings.
Preset (Model) # (1 – 15)
Fastening result OK/NG/Ready
Monitoring torque