Material files
To optimize the dosing system, the MCTC uses material files. These files contain information for different
purposes and can be generated by the user.
The information in a material file varies, depending on the type of dosing system which is used. For
gravimetric units, the file contains information about the flow characteristics of the material. For optometric
systems, the file contains information which can be used for consumption counting and dosing quantity. For
each system, new material files can be generated by the user.
For each dosing system type, this material file generation is explained in the dedicated operation chapter of
the device. The Material files menu can be accessed by pressing the material name on the production screen
(1), or by pressing the material name in the recipe menu (2).
tooling or higher login required
To Next Page
Loading...