PULSE - This function will indicate the number of heartbeats
per minute. Maximum pulse (50 to 240 bpm).
Console
In order for you to monitor your performance during the exercises, our equipment line has an
advanced console with liquid crystal display, with the information below:
Functions
Distance - This function indicates the distance traveled in
kilometers. The maximum distance considered is 99.5 km.
When you start cycling, the distance will be accumulated.
CALORIES - This function indicates the calories expended
during exercise and will be expressed in the “KCAL” unit. The
maximum calories to be recorded will be 990 kcal. When
you start cycling, the value will be recorded in ascending
order.
LOAD - This function will indicate the level of work
resistance.
General description of functions
1. Insert the batteries, turn on the system. When you press ADJUST, the entire LCD panel
will light up and you will hear a beep. After 2 seconds, adjust clock mode will enter.
(If any other item is entered, the user will not be able to make the adjustment).
TIME - This function marks the user's exercise time. When
you start pedaling, the value will be recorded in ascending
order.
VELOCITY - This function marks the speed in kilometers per
hour.
2. In the set clock function, press the MODE key to set the hour.
Hour> Minute> 12 / 24H> Alarm on / off> Alarm hour> Alarm minute> USER (SEX / AGE /
WEIGHT)> If you select the alarm as OFF, there will be no setting for the alarm hour or
minute.
3. In the inactive condition, press the MODE key to adjust TIME> CALORIES>
DISTANCE> PULSE> According to the setting, the selected item will flash. When making the
age adjustment, the display will show the MAXIMUM HEART BEAT (220 ~ AGE).
To Next Page
Loading...