Movincool Classic 10 User Manual

OPERATION MANUAL
CLASSIC 10 and CLASSIC 18
Unit Serial Number Range: 1111XXXX### to Present
(From November 2011 to Present)
READ THIS MANUAL CAREFULLY FOR INSTRUCTIONS ON CORRECT
INSTALLATION AND USAGE, AND READ ALL SAFEGUARDS
SECCIÓN EN ESPAÑOL
SECTION EN FRANÇAIS
AVAILABLE AT WWW.MOVINCOOL.COM

Movincool Classic 10 Specifications

General

Brand	Movincool
Model	Classic 10
Category	Air Conditioner
Language	English

Summary

General Warnings & Cautions

Installation

Choosing an Installation Site

Details precautions and criteria for selecting a suitable location for the unit.

Moving the Unit

Plugging in the Unit

Covers checking the power cord and plug, and electrical requirements for operation.

Operation

Control Panel

Identifies and describes the buttons and displays on the unit's control panel.

LED Display Descriptions

Explains the meaning of various codes and indicators shown on the LED display.

Operating in COOL Mode

Details how to use the unit in COOL mode and adjust set points.

Operating in FAN ONLY Mode

Changing from FAN ONLY Mode to COOL Mode

Operating Modes

Describes the COOL and FAN ONLY operating modes of the unit.

Temperature Control

Self-Diagnostic Codes

Lists and explains various error codes displayed by the unit.

Empty the Drain Tank

Provides step-by-step instructions for emptying the unit's drain tank.

Inspection & Maintenance

Empty the Drain Tank

Clean the Air Filters

Filter Removal Method

Filter Element Cleaning Method

In-Season/Off-Season Inspection & Maintenance

Troubleshooting

Technical Specifications of Classic 10

Technical Specifications of Classic 18