Why is my Movincool Climate Pro K63 not cooling properly?
Poor cooling performance in your Movincool Air Conditioner can occur due to several reasons. Check the following: * Ensure that air inlets or outlets are not blocked, keeping a minimum clearance of 24 inches (610 mm) from walls or other objects. * Clean the air filters, as dirty filters can impede performance. * Adjust the temperature setting if it is set too high.
What to do if my Movincool Air Conditioner does not operate?
If your Movincool Air Conditioner isn't operating, here are some things to check: 1. Make sure the unit is properly connected to the power supply and try plugging it in again. 2. Verify that the main power is on by checking the circuit breaker. 3. Reset the ground fault protective breaker if it has tripped. 4. Reset the LCDI power cord, and if the LCDI power cord is damaged, replace it.
What to do if Movincool Air Conditioner is leaking water?
If your Movincool Air Conditioner is leaking water, consider the following: * Ensure the tank is correctly installed by properly positioning it. * Check for and unclog any blockage in the tank inlet. * Inspect the drain hose for kinks or blockages, and clean it if necessary.
General| Compressor Type | Rotary |
|---|---|
| Refrigerant | R-410A |
| Power Consumption (Cooling) | 5.8 kW |
| Power Supply | 230V/60Hz |
| Operating Temperature Range (Cooling) | 64°F to 113°F |
Explains the meaning of safety symbols used in the manual.
Lists prohibited actions and precautions for safe unit operation.
Outlines safety rules for unit installation, relocation, and repair.
Describes the main components and layout of the control panel.
Details how to use the home screen for basic operations and settings.
Explains how to select different operating modes (Cool, Fan, Schedule).
Guides on accessing system settings and service information via the menu.
Covers accessing and adjusting various unit settings like time, display, and fan mode.
Instructions for changing the brightness level of the LCD display.
Guidelines for selecting a suitable location and ensuring proper ventilation.
Identifies and illustrates the various accessories provided with the unit.
Illustrates common ways to connect ductwork for different room pressure requirements.
Details on safe power connection, including LCDI cord information.
Instructions for connecting external warning and alarm devices to the unit.
Explains data tracking and requires user consent upon first power-up.
Steps to select the correct time zone for accurate time display.
Procedure to set or disable daylight savings time.
Instructions for manually setting the unit's clock if auto-sync fails.
Guide for preparing and installing the drain tanks for condensate collection.
How to set and operate the unit for cooling.
Instructions for using the unit solely for fan operation.
How to program the unit's operation based on a schedule.
Procedures for stopping, resuming, or temporarily pausing scheduled operations.
How to create, modify, and review programmed operating schedules.
Steps to erase all previously set operating schedules.
Instructions for removing, cleaning, and reinstalling air filters for optimal performance.
Guidelines for cleaning the unit exterior and preparing it for long-term storage.
To Next Page
