Movincool Office Pro 24 Installation Guide

Removal of Upper Front Panel Screws
Remove four (4) screws from upper
front panel.
1
(3)
(3)
Removal of Upper Front Panel
Slide upper front panel forward and
remove.
Removal of Air Outlet Louver
Louver can be removed from upper
front panel by unsnapping it rearward.
(From the Rear Side)
Install the Frame Sub-Assembly into the
upper front panel and attach it to the
upper front panel using two (2) screws
(provided).
(From the Front Side)
Install the Duct Sub-Assembly onto the
Frame Sub-Assembly using the six (6)
self-tapping screws as shown.
Reinstallation of Top Front Panel
Reinstall the Top Front Panel onto the
unit.
The unit is now ready for installation of
the optional Cool Air Ducts or flanges
(not included).
Office Pro 24 Nozzle Adapter Installation
CAREFULLY READ INSTRUCTIONS FOR CORRECT INSTALLATION AND USAGE.
© 2001 DENSO SALES CALIFORNIA, INC.
DENSO P/N: LA990009-0816
www.movincool.com
Nozzle Adapter Kit Part #: LAY84209-0010
Parts included with kit:
Description Qty. Remarks
Frame Sub-Assy 1
Duct Sub-Assy 1
Screw 2 Frame Sub-Assy to Panel
Screw, Self-Tapping 6 Duct Sub-Assy to Frame
Screw w/ Washer 8 Cool Air Duct or Flange Mounting
32
4
7
6
5
TABS
PIVOTS
(2)
DENSO SALES CALIFORNIA, INC.
REGISTERED TO ISO 9002
FILE NO. A5537

Movincool Office Pro 24 Specifications

General

Brand	Movincool
Model	Office Pro 24
Category	Air Conditioner
Language	English