Need help?Do you have a question about the Moxa Technologies NPort 5000 Series and is the answer not in the manual?
General| Model | NPort 5000 Series |
|---|---|
| Power Input | 12 to 48 VDC |
| Interface | RS-232/422/485 |
| Humidity | 5 to 95% |
| Certifications | Class I Division 2 |
Covers initial setup including wiring, power, grounding, network, serial connections, and LED indicators.
Details using NPort Administrator for managing device settings and configurations.
Explains accessing and configuring the NPort via its web-based interface.
Streamlines the initial NPort configuration through a three-step process.
Describes backing up and restoring NPort device configurations for management.
Recommends updating firmware to the latest version for enhanced security features.
Advises restricting network access by IP address to prevent unauthorized access.
Emphasizes changing default credentials and implementing strong password policies.
Provides recommendations for assessing and improving the device's security posture.
Introduces the various operating modes available for NPort device servers.
Explains the Real COM/TTY driver for transparent serial-to-Ethernet connectivity.
Details configuring the NPort to act as a TCP server for incoming host connections.
Describes how the NPort can initiate TCP connections to specified host computers.
Covers UDP communication for faster, efficient data transfer.
Explains how operation modes interact with network settings and parameters.
Provides a summary of key parameters for connection management and data packing.
Step-by-step guide for installing the NPort Administration Suite software.
Covers locating NPorts on the LAN and initiating device configuration.
Provides instructions for updating the NPort device firmware using the administration tool.
Explains mapping NPort serial ports to host COM ports using Windows Real COM drivers.
Describes simulating multi-drop serial behavior by creating and managing COM groups.
Outlines steps to map NPort serial ports to Linux host tty ports.
Instructions for obtaining and installing the necessary Linux driver files.
Details methods for mapping NPort serial ports to host tty ports on Linux systems.
Provides detailed pinout information for various NPort connectors.
Illustrates correct wiring configurations for Ethernet and Serial cables.
Details pin assignments for DB9 and DB25 connectors.
Explains how to set pull high/low resistors and terminators for RS-485 communication.
Details jumper settings for pull resistor configuration on specific NPort models.
Explains DIP switch settings for pull resistors and terminators on NPort IA5000 Series.
Lists MIB-II groups and variables supported by the NPort SNMP agent.
Details RFC1317 MIB objects specific to RS-232-like interfaces.
Explains the NPort's feature to periodically report its IP address to a location server.
States that the product may cause radio interference in domestic environments.
Details FCC compliance and potential interference issues in commercial/residential areas.
To Next Page