Need help?Do you have a question about the Moxa Technologies NPort 5110A and is the answer not in the manual?
General| Isolation | 1.5 kV |
|---|---|
| Certification | CE, FCC |
| Serial interface type | RS-232 |
| Serial ports quantity | 1 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Supported network protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, IGMP v1/2 |
| Compatible operating systems | SCO Unix, OpenServer UnixWare v2.1, v7 Unix SVR 4.2 Unix QNX 4.25, QNX 6 Solaris 10 FreeBSD AIX 5.x HP-UX 11i Mac OS v10.3 Linux v2.4.x, v2.6.x |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating temperature (T-T) | 0 - 60 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Input voltage | 12 - 48 V |
| Safety | UL, LVD |
Weight and Dimensions| Weight | 340 g |
|---|---|
| Dimensions (WxDxH) | 52 x 80 x 22 mm |
Provides an overview of the NPort 5000 series devices covered in the manual.
Guides on initial installation and setup of the NPort device server.
Details necessary wiring, power, and network connections for NPort setup.
Explains the meaning of various LEDs on different NPort models for status indication.
Explains configuration using NPort Administrator and other Windows utilities.
Details how to configure NPort devices using the web browser interface.
Guides on configuring NPort devices via Telnet and Serial Console interfaces.
Describes various NPort operation modes for TCP/IP and serial communication.
Details Real COM, RFC2217, TCP Server, TCP Client, UDP, and Pair Connection modes.
Explains Ethernet Modem, Reverse Telnet, PPP, and Disabled modes.
Covers settings like TCP alive check time, inactivity time, and max connections.
Details parameters for controlling data packing using delimiters and length.
Explains parameters like Local TCP port, Command port, and Destination IP address.
Covers user accounts, login policies, and password settings for device access.
Explains configuring automatic warnings and system event logging for monitoring.
Provides essential steps to enhance NPort device security against cyber threats.
Guides on installing and using the NPort Administrator software for device management.
Details backing up, restoring configurations, and upgrading device firmware.
Explains how to map NPort serial ports to host COM ports and create COM groups.
Describes using the Monitor and Port Monitor functions to check device status.
Guides on installing and mapping NPort serial ports on Linux systems.
Provides instructions for installing and mapping NPort serial ports on macOS.
Details porting NPort Real TTY driver to Arm-based platforms like Raspberry Pi.
Illustrates pin assignments and cable wiring for NPort ports.
Explains configuring RS-485 port termination and pull resistors.
Lists well-known port numbers and provides compliance information (CE, FCC).
To Next Page
