Need help?Do you have a question about the Moxa Technologies NPort 5210A and is the answer not in the manual?
General| Baud rate | 230.4 Kbit/s |
|---|---|
| Data bits | 5, 6, 7, 8 |
| Stop bits | 1, 1.5, 2 |
| Certification | CE, FCC |
| RS-232 signals | CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx |
| Flow control support | Yes |
| Serial interface type | RS-232 |
| Serial ports quantity | 2 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Mean time between failures (MTBF) | 134850 h |
| Product color | Black, Blue |
| Housing material | Metal |
| Input voltage | 12 - 48 V |
| Power consumption | 325 mA |
| Storage temperature (T-T) | -40 - 75 °C |
| Maximum operating altitude | 2000 m |
| Operating temperature (T-T) | 0 - 55 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Supported network protocols | ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP |
Weight and Dimensions| Weight | 340 g |
|---|---|
| Dimensions (WxDxH) | 90 x 100.4 x 22 mm |
Guides through the initial setup, including wiring, power, grounding, and network connection.
Details how to use the NPort Administrator utility for initial configuration.
Guides on configuring basic network and device settings through the utility.
Details how to set the operational mode for each serial port of the NPort.
Explains the Real COM mode for transparent serial-to-Ethernet communication.
Details the process of mapping NPort serial ports to host COM ports for software access.
Guides on how to update the NPort device's firmware using the utility.
Details the process of obtaining and installing the Linux TTY driver files.
Explains how to map NPort serial ports to Linux tty ports using the mxaddsvr utility.
Details the process of obtaining and installing the macOS TTY driver files.
Guides on using NPortConnect to map NPort serial ports to macOS tty ports.
Provides pinout diagrams for Ethernet and Serial ports on NPort devices.
To Next Page
