Moxa Technologies NPort 5210A User Manual

NPort 5000 Series User Manual
55
Change Password
You can set a password to restrict access to the NPort’s configuration parameters. (The default password for
NPort is moxa.) If a user does not enter the correct password when accessing the NPort through one of the
consoles (e.g., web console), access to the NPort configuration settings will be denied.
Web Interface for the NPort 5100, 5200, IA5000 Series Only
Web Interface for the Overall NPort 5000 Series
ATTENTION
If you forget the NPort’s password, the ONLY way to configure the NPort is by using the hardware reset
button to load the factory defaults. Before you set a password for the first time, it is a good idea to export
the NPort’s complete configuration to a file. Your configuration can then be easily restored if necessary.

Moxa Technologies NPort 5210A Specifications

General

Baud rate	230.4 Kbit/s
Data bits	5, 6, 7, 8
Stop bits	1, 1.5, 2
Certification	CE, FCC
RS-232 signals	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
Flow control support	Yes
Serial interface type	RS-232
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Mean time between failures (MTBF)	134850 h
Product color	Black, Blue
Housing material	Metal
Input voltage	12 - 48 V
Power consumption	325 mA
Storage temperature (T-T)	-40 - 75 °C
Maximum operating altitude	2000 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Supported network protocols	ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP

Weight and Dimensions

Weight	340 g
Dimensions (WxDxH)	90 x 100.4 x 22 mm